Residential Sheet Metal & Ventilation Services

Custom Sheet Metal Fabrication for Residential HVAC & Ventilation

I fabricate custom ductwork, transitions, plenums, boots, and ventilation components for residential HVAC and ventilation projects across the Sea to Sky corridor.

Residential HVAC Ductwork Installation & Repair

I install, replace, and repair residential HVAC ductwork, supply and return runs, plenums, takeoffs, and transitions, sized for real airflow across the Sea to Sky corridor.

Bathroom Fan Venting & Exhaust Ducting

I vent bathroom exhaust fans to proper exterior terminations, clearing moisture out of the home instead of into the attic, where it causes condensation and mould.

Range Hood Venting & Kitchen Exhaust Ducting

I duct range hoods to the outside with properly sized rigid ducting and exterior terminations, clearing smoke, grease, and steam instead of recirculating it.

Dryer Venting & Exhaust Duct Repair

I install and repair dryer venting with smooth rigid duct and proper exterior terminations, shortening runs, cutting lint buildup, and reducing fire risk.

HRV & ERV Ventilation Ducting

I install and correct the ducting for HRV and ERV systems: supply, exhaust, and fresh-air runs laid out for balanced whole-home ventilation in tight modern homes.

Heat Pump Ductwork & Duct Retrofits

I modify and retrofit ductwork for ducted heat pumps: resizing returns, reworking plenums, and correcting runs so the system delivers even heating and cooling.

Crawlspace & Under-Floor Duct Repair

I repair crawlspace and under-floor ductwork: reconnecting fallen runs, replacing crushed sections, and sealing and supporting ducting so heated air reaches the rooms above.

Renovation Ventilation & Duct Modifications

I adapt ductwork and ventilation during renovations: re-routing runs, adding exhaust, and fitting custom transitions so the system suits the home's new layout.

New Construction Ductwork & Ventilation

I rough in and install complete duct and ventilation systems for new homes: supply, return, exhaust, and HRV/ERV ducting, coordinated with builders and the trades.

Kitchen Ventilation & Exhaust Planning

I plan and build the whole kitchen exhaust path (hood ducting, the right exterior cap, and make-up air where a powerful hood needs it) so the kitchen actually clears smoke and steam.

Exterior Vent Terminations & Wall and Roof Caps

The cap where a vent exits the building is where most venting problems start. I install wall and roof caps with proper backdraft dampers, sealed and flashed to keep weather and pests out.

Attic Venting Corrections for Bath & Exhaust Fans

A fan that vents into the attic instead of outside dumps moist air where it condenses and causes mould. I reroute it to a sealed, insulated exterior termination.

Airflow Problems & Duct Repair

When one room never heats, cools, or gets air, the duct is usually the cause. I trace weak airflow back to crushed, disconnected, or undersized ducting and fix the actual restriction.

Custom Duct Transitions, Plenums & Fittings

When standard fittings do not fit the equipment or the framing, I fabricate the transitions, plenums, takeoffs, and boots that connect it all properly, often supporting an HVAC installer.

Basement & Secondary Suite Ventilation

A legal suite needs its own exhaust and fresh-air path. I plan and install the bathroom, kitchen, dryer, and HRV/ERV ducting a basement or secondary suite needs, coordinated with the renovation.

Need ductwork or ventilation help?

Send a few details about the home, the issue, and the location. I will let you know whether I can help and what the next step looks like.

Request a Quote